VOLKTEK NSH-9308P Manual de usuario descargar pdf (Pagina 7)

2.1 Configurations

2.1.1 System information

The system diagram shows common system information, they are H/W, F/W version, MAC address,

IP address, subnet mask, IP gateway, default VLAN value of management port, name, password,

timeout value, and SNMP communities…etc. Once you changed the settings, it’s needed to press

the “Apply“ button to implement these settings, and you can press the “Refresh“ button to get

updated status of system information.

2.1.1.1 DHCP

The default DHCP setting is disabled, so default IP address or user defined IP address was used

when powered on this switch. If this switch needs an IP address assigned by DHCP server, you

should check the square field and then press “Apply“ to implement. User must be aware that if DHCP

setting was enabled from web page, and the DHCP server is working, the connection will be lose,

1 2 3 4 5 6 7 8 9 10 11 12 ... 30 31

Sin comentarios

VOLKTEK NSH-9308P Manual de usuario Pagina 7